Activated Charcoal Clay Face Mask is good for oily and blemish-prone skin
Activated Bamboo Charcoal is hugely popular in today’s beauty world—and for good reason! It’s a powerful ingredient that deeply cleans skin, drawing out even the most deep-seated impurities. Combined with both Bentonite and White Kaolin clays, this rich mask will help control oil production and target acne, leaving your complexion crystal-clear and purified.
About 8 to 12 uses per 4 fl oz jar
WHITE KAOLIN CLAY - The mildest of all clays, White Kaolin is suitable for all skin types, especially sensitive skin. Its soothing properties help easily irritated skin and complexions prone to breakouts, rashes, and redness. With its soft and gentle abrasive texture, White Kaolin Clay works as a mild exfoliant, gently sloughing off dead and dry skin cells, to help keep your complexion smooth and clarified. White Kaolin will not clog pores and helps removes traces of dirt, impurities, and bacteria, making it an ideal component in this acne-fighting mask.
BENTONITE CLAY - Composed mainly of weathered and aged volcanic ash sediments, Bentonite Clay is highly absorbent and perfect for those with oily, acne-prone skin. Known for its purifying abilities, Bentonite extracts oil and dirt, unclogs and shrinks pores, and targets blemishes with its antibacterial properties. After doing its job detoxifying, Bentonite Clay infuses skin with minerals like calcium, magnesium, potassium, and silicon, all important components that help keep skin in good health!
ACTIVATED BAMBOO CHARCOAL - Activated Bamboo Charcoal—charcoal that has been pulverized and steamed—has even greater drawing power due to its wider surface area, enabling it to absorb a higher volume of bacteria, impurities, and micro-particles.
Due to its antibacterial and exfoliating properties, and its ability to deep clean, bamboo charcoal is great for folks with acne, troubled skin, or oily/combination skin. It works to unclog pores and absorb excess oil to help fight blemishes and blackheads. Charcoal adsorbs dirt and debris from pores leaving skin ultra-clean, soft and smooth. Four times more adsorbent (yes, the word is adsorbent) than wood charcoal, bamboo charcoal eliminates impurities and neutralizes odors.
How to Use
Creating an application technique that works for your skin will get you one step closer to a beautiful complexion.
Mixing The Clay
Step 1: Start with approx 1/2 to 1 Tablespoon of clay in a clay face mask bowl or any small non-metal bowl.
Step 2: Slowly add 1/4 teaspoon of room temperature or warm water and mix with a non-metal spoon.
Step 3: Continue adding small amounts of water and mixing until a creamy mud-like consistency is reached. Some clays need more water and some need less, so always begin with just a little water and continue to check the consistency. Be sure to mix well to a smooth clay paste.
Applying the Mask
Step 1: Begin with a clean*, dry face free of make-up, moisturizers, etc. (*Read the FAQ "Should I wash my face before using a facial clay mask?")
Step 2: Using a clay face mask applicator brush or a flat foundation brush, apply the mask to your face. You can apply using any technique that you like. I usually apply a thin first layer and then apply a second thicker layer so the mask is about 1/8″ thick.
If you have combination skin, read our blog about Targeted Application and Multi-Masking
Step 3: Allow mask to dry for 5-10 minutes. Drying times vary depending on the clay and your skin type. As the clay dries you will feel a pulling and tightening sensation on your skin.
For oily skin or a deep cleanse, allow the mask to dry almost completely and then remove--leaving the mask on longer does not add anything beneficial to the treatment and may cause increased redness.
The drying phase is when the clay draws moisture from the surface of the skin.
Thus for sensitive or dry skin or a more gentle cleanse, allow the mask to only dry around the edges of the face and nose and then remove (about 5 minutes).
Removing the Mask
Step 1: I like to remove a clay mask with warm water and my fingers.
To re-hydrate the mask a bit for easier removal, you can dampen a face cloth with warm water and hold it to the face before removal.
Using gentle circular motions with fingers helps to stimulate circulation, polish your skin and provide an exfoliating action as the mask is removed. You may also use a face cloth to remove the mask.
Step 2: Gently pat face dry completely with a soft face towel.
After application of a clay mask, you will feel a tightening effect and the skin may even feel a bit itchy at first.
Clay helps increase circulation. As a result, you may experience mild temporary redness for up to 30 minutes.
Step 3: Moisturize! Follow-up with a facial oil or moisturizer
Step 4: Enjoy your super smooth and beautifully fresh skin!
If you are concerned about skin sensitivity do a skin patch test.
For more detailed information please read our blog How To Use Clay Face Masks
To Wash or Not To Wash . . .
that is the question!
Most of the time the directions included with a clay mask state, "begin with a clean face," but does that mean you need to actually "wash" your face first?
Whether or not to wash your face before using a facial clay is up for debate and you are likely to find a lot of conflicting information online.
There are those who say you should "absolutely" wash your face in to order remove the surface layer of dirt, oil and makeup.
This surface grime can hinder the ability of the active clay ingredients to get into the pores and do their job. Some also believe that when you apply a clay mask onto unclean skin, you may be trapping all sorts of dirt, bacteria and other impurities and possibly driving them deeper into the facial pores.
Not To Wash
Some believe that washing before applying a clay mask may be too drying for those with dry or sensitive skin types.
After washing pores are open and anything you apply will be more rapidly absorbed which may cause more irritation with sensitive skin. If you think about it, moisturizing is best done immediately after washing for that same reason.
In my opinion, the answer to this question really depends on the type or purpose of the mask you are using and your skin type. For example, if you are using a deep cleansing mask for oily or problem combination skin, a fresh wash with warm water opens your pores which prepares your skin for a deeper cleansing experience.
Basically, the same logic holds true for whether or not to shower before or after a clay mask treatment.
Showering Before: Again this method works well with deep cleansing masks for oily and combination skin. The warm water and steam from the shower open your pores.
Showering After: If you have drier skin, you want to apply the mask before taking a shower. The warm shower will actually his help seal in the moisture.
To be honest, I do not wash my face before applying a clay mask. However, I do not wear make-up or use heavy creams and basically, my face simply gets dirty from normal exposure to everyday dirt and pollutants. I have aging dryish skin and washing before applying the face mask makes my skin feel too dry afterward. I just use the clay mask and then after rinsing, I moisturize.
Now, all that being said, if your skin is oily, your face feels quite dirty or is loaded with make-up you may choose to do a quick wash before applying the clay.
Our face has different zones in which the skin can vary in thickness, texture, pore size and the number of oil-producing glands.
Each zone may have very different needs and require individual attention.
So, what happens if you have multiple facial skin issues, like dryness, oily spots, and blemishes?
The answer is Multi-Masking . . .
What is Multi-Masking
Multi-masking is exactly what it sounds like. Instead of applying one face mask over your entire face, you apply different masks to different areas of the face in order to treat multiple skincare concerns at the same time.
For more information please read our blog Multi-Masking and Targeted Application For Combination Facial Skin
Whether you call them "face oils" or "facial serums," nourishing, unrefined organic oils can moisturize, soothe and help restore natural balance to facial skin.
While many people, especially those with oily or acne prone skin tend to shy away from oil-based moisturizing, it can be a very important step in daily skin care. An organic facial oil helps to increase the moisture content in the skin and prevent further moisture loss.
If you have oily skin, nourishing organic oils can help mimic the natural skin sebum which in turn sends signals to oil producing cells that say, "hey my skin is moisturized so stop producing oil."
Using products created to "dry out" oily skin will actually trigger the oil glands to increase oil production, which only exacerbates the oily skin problem. A wholesome moisturizer helps balance skin oil production.
If you have dry skin an organic facial oil made from unrefined botanical oils creates a protective but breathable barrier that slows moisture evaporation and thus helps lock in moisture.
If you have irritated skin a facial oil can help calm inflammation and soothe red irritated skin.
It is especially important for those (like me!) with maturing skin to keep your face adequately moisturized to help with fine lines and wrinkles.
The main thing is to make sure that you are using the right kind of moisturizer.
The most nourishing face oils are those made with unrefined, certified organic plant-based oils.
Unrefined oils are either cold-pressed or expeller-pressed.
They are minimally processed without chemicals under temperature controlled conditions.
Minimal processing ensures a nutrient-rich, high-quality natural oil.
USDA Certified Organic means the botanical oils are free of synthetic additives, pesticides, and preservatives.
Stay away from petroleum-based products that contain mineral oils which clog your pores and cause breakouts.
An Unofficial Label
Although not official labels, we use the label on the left on our website and the label on the right on our packaging. We use them for products, like the Dead Sea Black Clay, Bamboo Charcoal, Rhassoul Clay and Loofah Pumice Foot Soaps and our Mud & Clay and Rosemary Mint Charcoal Shampoo Bars. We also use these labels on our Clay Facial Masks. Although these products are made with organic ingredients, they do not fit the criteria for the USDA Certified Organic Label.
The USDA Organic standard states that a product must be made of 95-100% organic ingredients in order to bear the USDA Certified Organic seal.
The remaining 5% must be nonagricultural ingredients that are on the NOP (National Organic Products) list. Since this list was devised solely for the food industry, there are ingredients like Bamboo Charcoal, Rhassoul Clay, Green Illite Clay, etc. that do not appear on this list.
Even though we can't label this product organic, if you read the ingredient list you will see that we still use USDA Certified Organic ingredients whenever possible.
For more detailed information, please read our blog, "What Do All of the Organic Labels Mean?"